Formax FD 6306-Standard 2F Folder Inserter
secure transaction
- Two Station Folder Inserter w/ 1 High Capacity Document Feeder and 1 Standard Feeder
- Speed Up to 3,800 pieces per hour
- Duty Cycle Up to 40,000 pieces per month
- Standard Feeders Up to 325 sheets each, 20# bond
- Envelope Hopper Up to 400 envelopes, top-loading
- Machine Dimensions 20" W x 29" H x 51" L
- Sheet Size 3.5” - 14” H x 5” - 9” W
- Maximum Insert Thickness 1mm
- Maximum Set Thickness 2.5mm
- Envelope Size 3.5” - 6.4” H x 5.5” - 9.8” W
- Set Thickness Up to 2.5 mm
- Weight 175 lbs. (3 stations)
- Voltage 120V AC, 60 Hz
Formax FD 6306-Standard 2F Folder Inserter
Product Type Folder Inserter Speed Up to 3,800 pieces per hour Duty Cycle Up to 40,000 pieces per month Standard Feeders Up to 325 sheets each, 20# bond High-Capacity Feeder
(Standard 2F, Special 2F, Standard 2FP models)Up to 725 sheets, 20# bond Envelope Hopper Up to 400 envelopes, top-loading High-Capacity Vertical Stacker Up to 500 filled envelopes Machine Dimensions 20" W x 29" H x 51" L Sheet Size 3.5” - 14” H x 5” - 9” W, Programmable Jobs 50 Maximum Insert Thickness 1mm Maximum Set Thickness 2.5mm Envelope Size 3.5” - 6.4” H x 5.5” - 9.8” W * Set Thickness Up to 2.5 mm Weight 175 lbs. (3 stations) Voltage 120V AC, 60 Hz
Popup Text
No Expert Install
$349.00 Expert Install
Installation Service for equipment includes the following:
JTF will schedule an appointment with one person per site. Unless otherwise requested and/or scheduled, the standard practice is to start all installation services within one week the delivery of the hardware to the customer’s location.
Unpacking: JTF will inventory the shipment against the packing list, unpack and install all delivered products.
Setup/Installation: JTF will physically assemble, connect peripherals, network cables, and power cords that were purchased from JTF.
a. This service provides installation of drivers on a single PC workstation (not server), network setup, including the programming of the IP address and network settings and verification of the network functionality, wireless connection setup and verification of the functionality over the Internet.
b. For configuration networking, the Customer can choose between automatic configuration using BOOTCP or Dynamic Host Configuration Protocol (DHCP), or manual configuration with IP address, default gateway, and subnet mask.
c. For multifunction products, the service provides setup of the ‘send to email configuration’ and configuration of the SMTP or LDAP.
d. This service provides the Customer-identified key operator with a basic overview on how to install consumables, plus explanations of basic features and functionality such as drivers, control panel features, embedded Web server, and alerts.
secure transactionFeatured
